WebCars! The Corvette Story

Sell - Buy a Corvette
2023 Chevrolet Corvette Z06 In Amplify Orange Tint
To learn more about the 2023 Corvette, click here.

2023 Corvette Specs

2023 Corvette Stingray Specs

Body Specs

Model Chevrolet Corvette Stingray
Body styles / driveline: Two Door Coupe, Hardtop Convertible / Mid Engine
Manufacturing Plant: Bowling Green, KY
Wheelbase: 107.2 inches (2,722 mm)
Length: 182.3 inches (4,630 mm)
Width: 76.1 inches (1,934 mm)
Height: 48.6 inches (1,234 mm)
Track: Front: 64.9 inches (1,648 mm)
Rear: 62.4 inches (1,586 mm)
Dry Weight: 3,366 lbs (1,530 kg) - Coupe
Weight Distribution: Front: 39.4%
Rear: 60.6%
Seating Capacity: Two
Headroom: 37.9 inches (962 mm)
Leg Room: 42.8 inches (1,086 mm)
Shoulder Room: 54.4 inches (1,381 mm)
Hip Room: 52.0 inches (1,321 mm)
Cargo Volume: 12.6 cu. ft. (356.8 cu. L)
Fuel Capacity: 18.5 gal (70 L)
Transmission: M1L 8-speed dual clutch (DCT) 1st Gear 2.91:1
2nd Gear 1.76:1
3rd Gear 1.22:1
4th Gear 0.88:1
5th Gear 0.65:1
6th Gear 0.51:1
7th Gear 0.40:1
8th Gear 0.33:1
Reverse Gear 2.63:1
Ring and Pinion Ratio 3.55:1 (mLSD, eLSD)
Standard Fuel Tank Capacity: 18.5 gal (70 L)
Wheels: Front: 19-inch x 8.5-inch (w/5 x 120mm bolt pattern)
Rear: 20-inch x 11-inch (w/5 x 120mm bolt pattern)
Tires: Michelin Pilot Sport ALS
with Z51: Michelin Pilot Sport 4S

Front: 245/35ZR19
Rear: 305/30ZR20
EPA Fuel Economy: 15 MPG (City) / 27 MPG (Highway) / 19 MPG (Combined)


Engine Specs

Stingray Designation: LT2
Type: 90° V8, Pushrod, OHV (overhead Valve)
Displacement: 374.92 cu. in. (6.2 L)
Bore / Stroke - Coupe, Convertible: 4.06 inches x 3.62 inches 103.25 mm x 92 mm)
Induction System: Normally Aspirated
Horsepower: 495 hp @ 6,450 RPM
Torque: 470 lbs. - ft. @ 5,150 RPM (SAE-certified, with performance exhaust)
Fuel Delivery: Direct injection with Active Fuel Management: Max pressure: 2,175 psi (15 Mpa / 150 bar)
Throttle Body: 87mm single bore (electronic)
Redline: 6,500 RPM
Compression Ratio: 11.5:1
ECU: GM E99 (32-bit processing)
Block Material: 319-T7 cast aluminum
Oiling System: Dry sump-type; includes oil-spray piston cooling
Combustion Chamber Voliume: 59 cc
Engine Oil Capacity: 7.5 Quarts, with filter
Oil Type: Dexos 2 0W40 synthetic


Performance

0 - 60 MPH: 3.0 seconds (GM) 2.9 seconds with Z51 (GM)
1/4 mile: 11.2 seconds @ 123 MPH (GM)
11.2 seconds @ 121 MPH with Z51 (GM)

0 - 60 MPH: 2.8 seconds with Z51 (Car and Driver)
1/4 mile: 11.2 seconds @ 122 MPH with Z51 (Car and Driver)


Chassis Specs

Suspension - Front: Short/long arm (SLA) double wishbone, forged aluminum upper and cast aluminum L-shape lower control arms; monotube shock absorbers (46mm /); Magnetic Selective Ride Control 4.0 available on Z51. Adjustable front lift with memory is available
Suspension - Rear: Short/long arm (SLA) double wishbone, forged aluminum upper and cast aluminum L-shape lower control arms; direct-acting stabilizer bar; monotube shock absorbers (46mm); Magnetic Selective Ride Control 4.0 available with Z51
Steering: Bosch/ZF variable-ratio rack-and-pinion with electric power assist; includes Active Steer Stops with available Magnetic Ride Control 4.0
Steering Ratio: 15.7:1
Turning Circle: 38 ft. (11.6 m)
36.4 ft. (11.1 m) - with FE4 Magnetic Ride Control

Brake Specs

Type: Front and rear E-boost-assisted discs with Brembo four-piston/two-piece front calipers and four-piston/monobloc rear calipers
With Z51 – Front and rear E-boost-assisted discs with Brembo four-piston monobloc caliper at front and rear
Rotor Diameter: Front: 12.6 inches (321 mm)
13.3 inches (345 mm) - with Z51
Rear: 13.6 inches (339 mm)
13.8 inches (360 mm) - Z51
Rotor Thickness: Front: 1.18 inches (30 mm)
1.18 inches (30 mm) - Z51
Rear: 1.02 inches (26 mm)
1.06 inches (27 mm) - Z51

2023 Corvette Z06 Specs

Body Specs

Model Chevrolet Corvette Z06
Body styles / driveline: Two Door Coupe, Hardtop Convertible / Mid Engine
Manufacturing Plant: Bowling Green, KY
Wheelbase: 107.2 inches (2,722 mm)
Length: 184.6 inches (4,688 mm)
185.9 inches (4,722 mm) with carbon fiber ground effects
Width: 79.7 inches (2,025 mm)
Height: 48.6 inches (1,235 mm)
Track: Front: 66.3 inches (1,685 mm)
Rear: 66.1 inches (1,678 mm)
Dry Weight: 3,434 lbs (1,561 kg) - Coupe - Z07 equipped with carbon fiber wheels
Weight Distribution: Front: N/A
Rear: N/A
Seating Capacity: Two
Headroom: 37.9 inches (962 mm)
Leg Room: 42.8 inches (1,087 mm)
Shoulder Room: 54.4 inches (1,382 mm)
Hip Room: 52.0 inches (1,321 mm)
Cargo Volume: 12.6 cu. ft. (357 cu. L)
Fuel Capacity: 18.5 gal (70 L)
Transmission: M1L 8-speed dual clutch (DCT) 1st Gear 2.91:1
2nd Gear 1.76:1
3rd Gear 1.22:1
4th Gear 0.88:1
5th Gear 0.65:1
6th Gear 0.51:1
7th Gear 0.40:1
8th Gear 0.33:1
Reverse Gear 2.63:1
Ring and Pinion Ratio 5.56:1
Standard Fuel Tank Capacity: 18.5 gal (70 L)
Wheels: Front: 20 inch x 10-inch (w/5 x 120mm bolt pattern)
Rear: 21-inch x 13-inch (w/5 x 120mm bolt pattern)
Tires: Michelin Sport Cup 2 R ZP (with Z07 option)
Front: 275/30ZR20
Rear: 345/25ZR21
EPA Fuel Economy: N/A


Engine Specs

Z06 Designation: LT6
Type: 90° V8, DOHC
Displacement: 374.92 cu. in. (6.2 L)
Bore / Stroke: 4.104 inches x 3.150 inches (104.25 mm x 80 mm)
Induction System: Normally Aspirated
Horsepower: 670 hp @ 8,600 RPM - Tested per SAE J1349
Torque: 460 lbs. - ft. @ 6,300 RPM - Tested per SAE J1349
Fuel Delivery: Exhaust side direct injection. Max pressure: 5,076 psi
Throttle Body: Twin 87mm single bore (electronic)
Redline: 8,600 RPM
Compression Ratio: 12.5:1
ECU: GM E68 (32-bit processing)
Block Material: A319-T7 sand-cast aluminum with pressed-in iron cylinder liners and four-bolt main bearing caps
Cylinder Head Material: A356 T6 cast aluminum
Oiling System: Six stage dry sump (8-qt. capacity); includes oil-spray piston cooling
Combustion Chamber Voliume: 58.8 cc
Engine Oil Capacity: 8.0 Quarts
Oil Type: DexosR synthetic 5W50
Valvetrain: Dual overhead camshafts with mechanical finger follower valvetrain and dual-coil valve springs
Valve Size 1.654 inch / 42 mm. titanium (intake) & 1.378 inch / 35 mm. sodium filled (exhaust)
Firing Order 1-4-3-8-7-6-5-2


Performance

0 - 60 MPH: 2.6 seconds (GM, preliminary)
1/4 mile: 10.6 seconds (GM, preliminary)


Chassis Specs

Suspension - Front: Short/long arm (SLA) double wishbone, forged aluminum upper and cast aluminum L-shape lower control arms; monotube shock absorbers (46mm); Magnetic Selective Ride Control 4.0 available. Specific calibration with available Z07 package. Front lift with memory is available.
Suspension - Rear: Short/long arm (SLA) double wishbone, forged aluminum upper and cast aluminum L-shape lower control arms; direct-acting stabilizer bar; monotube shock absorbers (46mm); Magnetic Selective Ride Control 4.0. Specific calibration with available Z07 package
Steering: Variable-ratio rack-and-pinion with electric power assist; includes Active Steer Stops with available Magnetic Ride Control 4.0
Steering Ratio: 15.7:1
Turning Circle: N/A


Brake Specs

Type: Front and rear eBoost-assisted discs with Brembo six-piston/two-piece front calipers and four-piston/monobloc rear calipers.
Rotor Diameter: Front: 14.6 inches (321 mm) x 1.3 inches (34 mm.)
Front: 15.7 inches (398 mm) x 1.5 inches (38 mm.) - With available carbon ceramic
Rear: 15.0 inches (339 mm) x 1.3 inches (38 mm.)
Rear: 15.4 inches (390 mm) x 1.3 inches (34 mm.) - With available carbon ceramic

Corvette Spotter for the iPhone-txt
Introducing the Vette Spotter app for the iPhone.


The Vette Spotter app can identify the year of any Corvette.


All years and generations are covered, from 1953 to 2014. Over 350 photographs and detailed text are included.

Available_on_the_App_Store_Badge_US-UK_135x40_0801

To WebCars! Home