WebCars! The Corvette Story

Sell - Buy a Corvette
2025 Chevrolet Corvette ZR1 Coupe Convertible

To learn more about the 2025 Corvette, click here.

2025 Corvette Specs

2025 Corvette ZR1 Specs

Body Specs

Model Chevrolet Corvette ZR1
Body styles / driveline: Two Door Coupe, Hardtop Convertible / Mid Engine
Manufacturing Plant: Bowling Green, KY
Wheelbase: 107 inches (2,723 mm)
Length: 185.9 inches (4,722 mm)
Width: 79.7 inches (2,025 mm)
Height: 48.6 inches (1,234 mm)
Track: Front: 66.3 inches (1,685 mm)
Rear: 66.1 inches (1,678 mm)
Dry Weight: 3,370 lbs (1,665 kg) - Coupe
3,458 lbs (1,705)kg - Convertible
Weight Distribution: Front: 39.4%
Rear: 60.6%
Seating Capacity: Two
Headroom: 37.9 inches (963 mm)
Leg Room: 42.8 inches (1,087 mm)
Shoulder Room: 54.4 inches (1,382 mm)
Hip Room: 52.0 inches (1,321 mm)
Cargo Volume: 12.6 cu. ft. (356.8 cu. L)
Fuel Capacity: 18.5 gal (70 L)
Transmission: M1L 8-speed dual clutch (DCT)
Standard Fuel Tank Capacity: 18.5 gal (70 L)
Wheels: Front: 19-inch x 8.5-inch (w/5 x 120mm bolt pattern)
Rear: 20-inch x 11-inch (w/5 x 120mm bolt pattern)
Tires: Michelin Pilot Sport 4S
Michelin Pilot Sport Cup 2 R with ZTK
Front: 245/35ZR19
Rear: 305/30ZR20


Engine Specs

Designation: LT7
Type: LT7 Twin-Turbocharged 5.5L DOHC VVT DI
Displacement: 374.92 cu. in. (6.2 L)
Bore / Stroke - Coupe, Convertible: 4.104 inches x 3.150 inches / 104.25 mm x 80 mm
Induction System: Normally Aspirated
Horsepower: 1,064 hp (873 kW) @ 7,000 RPM
Torque: 828 lbs. - ft. (1,123 Nm)@ 6,000 RPM
Fuel Delivery: PDI (DI - Max pressure: 5,076 psi (35 Mpa / 350 bar) & Port Fuel Injection)
Throttle Body: Twin 65mm single bore (electronic)
Redline: 7,000 RPM
Compression Ratio: 9.8:1
ECU: GM E99 (32-bit processing)
Block Material: A319 cast aluminum with cast-in iron cylinder liners and four-bolt main bearing caps
Oiling System: Seven-stage dry sump (8-qt. capacity) with oil-spray piston cooling
Combustion Chamber Voliume: 59.92 cc
Firing Order 1-4-3-8-7-6-5-2
Turbo Chargers Twin 76 mono-scroll ported shroud ball bearing turbos (67mm MAR compressor), E-Waste gates
Charge Cooling Dual engine-mounted water to air charge coolers
ECU GM E68 (32-bit processing)
Engine Oil Capacity: 8 Quarts
Oil Type: Dexos R 5W50 synthetic


Chassis Specs

Suspension - Front: Short/long arm (SLA) double wishbone, forged aluminum upper and cast aluminum L-shape lower control arms; monotube shock absorbers (46mm /); Magnetic Selective Ride Control 4.0 available on Z51. Adjustable front lift with memory is available
Suspension - Rear: Short/long arm (SLA) double wishbone, forged aluminum upper and cast aluminum L-shape lower control arms; monotube shock absorbers; Magnetic Selective Ride Control 4.0. Specific calibration with available ZTK package. Adjustable front lift with memory is available
Steering: Short/long arm (SLA) double wishbone, forged aluminum upper and cast aluminum L-shape lower control arms; direct-acting stabilizer bar; monotube shock absorbers; Magnetic Selective Ride Control 4.0. Specific calibration with available ZTK package
Steering Ratio: 15.7:1
Turning Circle: 38 ft. (11.6 m)
Wheel Size Front: 20-inch x 10-inch (w/5 x 120mm bolt pattern)
Rear: 21-inch x 13-inch (w/5 x 130mm bolt pattern)
Tire Size Front: 275/30ZR20
Rear: 345/25ZR21

Brake Specs

Type: Front and rear E-boost-assisted discs with Brembo four-piston/two-piece front calipers and four-piston/monobloc rear calipers
With Z51 – Front and rear E-boost-assisted discs with Brembo four-piston monobloc caliper at front and rear
Brake Tyoe Front and rear eBoost-assisted carbon ceramic discs with six-piston/monobloc front calipers and four-piston/monobloc rear calipers
Brake Rotor Size: Front: 15.7 x 1.5 inches (400 mm x 38 mm)
Rear: 15.4 x 1.3 inches (390 mm x 34 mm)


2025 Corvette Z06 Specs

Body Specs

Model Chevrolet Corvette Z06
Body styles / driveline: Two Door Coupe, Hardtop Convertible / Mid Engine
Manufacturing Plant: Bowling Green, KY
Wheelbase: 107.2 inches (2,722 mm)
Length: 184.6 inches (4,688 mm)
185.9 inches (4,722 mm) with carbon fiber ground effects
Width: 79.7 inches (2,025 mm)
Height: 48.6 inches (1,235 mm)
Track: Front: 66.3 inches (1,685 mm)
Rear: 66.1 inches (1,678 mm)
Dry Weight: 3,670 lbs (1,665 kg) - Coupe
3,758 lbs (1,705) - Convertible
Seating Capacity: Two
Headroom: 37.9 inches (963 mm)
Leg Room: 42.8 inches (1,087 mm)
Shoulder Room: 54.4 inches (1,382 mm)
Hip Room: 52.0 inches (1,321 mm)
Cargo Volume: 9.1 cu. ft. (258 cu. L)
Fuel Capacity: 18.5 gal (70 L)
Transmission: M1L 8-speed dual clutch (DCT)
Standard Fuel Tank Capacity: 18.5 gal (70 L)
Wheels: Front: 20 inch x 10-inch (w/5 x 120mm bolt pattern)
Rear: 21-inch x 13-inch (w/5 x 120mm bolt pattern)
Tires: Michelin Sport Cup 2 R ZP (with Z07 option)
Front: 275/30ZR20
Rear: 345/25ZR21
EPA Fuel Economy: N/A


Performance

0 - 60 MPH: 2.6 seconds (GM, preliminary)
1/4 mile: 10.6 seconds (GM, preliminary)


Chassis Specs

Suspension - Front: Short/long arm (SLA) double wishbone, forged aluminum upper and cast aluminum L-shape lower control arms; monotube shock absorbers (46mm); Magnetic Selective Ride Control 4.0 available. Specific calibration with available Z07 package. Front lift with memory is available.
Suspension - Rear: Short/long arm (SLA) double wishbone, forged aluminum upper and cast aluminum L-shape lower control arms; direct-acting stabilizer bar; monotube shock absorbers (46mm); Magnetic Selective Ride Control 4.0. Specific calibration with available Z07 package
Steering: Variable-ratio rack-and-pinion with electric power assist; includes Active Steer Stops with available Magnetic Ride Control 4.0
Steering Ratio: 15.7:1
Turning Circle: N/A


Brake Specs

Type: Front and rear eBoost-assisted discs with Brembo six-piston/two-piece front calipers and four-piston/monobloc rear calipers.
Rotor Diameter: Front: 14.6 inches (321 mm) x 1.3 inches (34 mm.)
Front: 15.7 inches (398 mm) x 1.5 inches (38 mm.) - With available carbon ceramic
Rear: 15.0 inches (339 mm) x 1.3 inches (38 mm.)
Rear: 15.4 inches (390 mm) x 1.3 inches (34 mm.) - With available carbon ceramic


Corvette E-Ray Specs
Engine

Type LT2 6.2L V-8 VVT with direct injection and Active Fuel Management (cylinder deactivation) and Stop/Start
Bore & stroke (in. / mm): 4.06 x 3.62 / 103.25 x 92
Block Material: A319-T7 cast aluminum with cast-in iron cylinder liners and nodular main bearing caps
Oiling System: Dry sump-type (7.5-qt. capacity); includes oil-spray piston cooling
Oil Type: Dexos 2 0W40 synthetic
Cylinder Head Material: 319-T7 cast aluminum
Combustion Chamber Volume: 59cc
Compression Ratio: 11.5:1
Valvetrain: Overhead valve, two valves per cylinder; dual-equal variable valve timing
Valve Size (in. / mm): 2.13 / 54 hollow (intake) & 1.59 / 40.4 sodium filled (exhaust)
Fuel Delivery: Direct injection with Active Fuel Management: Max pressure: 2,900 psi (20 Mpa / 200 bar)
Firing Order: 1-8-7-2-6-5-4-3 (all cylinders); 1-7-6-4 (with deactivation)
Throttle Body: 87mm single bore (electronic)
ECU: GM E99 (32-bit processing)
Horsepower (hp / kW): 495 / 369 @ 6450 rpm
Torque (lb.-ft. / Nm): 470 / 637 @ 5150 rpm


Transmission and Axle

Type: MLH 8-speed dual clutch (DCT)


Electrification System

Type: Single motor and gearset
Motor: Permanent magnetic drive motor
Power: 160 hp / 120 kW
Torque (lb.-ft. / Nm): 125 / 165 @ motor
Battery Type: Lithium-ion
Energy: 1.9 kWh
Combined Power (with engine): 655 hp / 481 kW


Chassis and Suspension

Front Suspension: FE5 Short/long arm (SLA) double wishbone, forged aluminum upper and cast aluminum L-shape lower control arms; monotube shock absorbers; Magnetic Selective Ride Control 4.0. Adjustable front lift with memory is available
Rear Suspension: FE5 Short/long arm (SLA) double wishbone, forged aluminum upper and cast aluminum L-shape lower control arms; direct- acting stabilizer bar; monotube shock absorbers; Magnetic Selective Ride Control 4.0
Steering Type: Variable-ratio rack-and-pinion with electric power assist; includes Active Steer Stops with Magnetic Ride Control 4.0
Steering ratio: 15.7:1
Turning Circle (ft. / m): 36.4 / 11.1
Brake Type: Front and rear eBoost-assisted carbon ceramic discs with Brembo six-piston/monobloc front calipers and four-piston/monobloc rear calipers
Brake Rotor Size (in. / mm): Front: 15.7 x 1.5 / 398 x 38
Rear: 15.4 x 1.3 / 391 x 34
Wheel Size: Front: 20-inch x 10-inch (w/5 x 120mm bolt pattern)
Rear: 21-inch x 13-inch (w/5 x 120mm bolt pattern)
Wheel Size: Front: 275/30ZR20
Rear: 345/25ZR21


Exterior Dimensions

Wheelbase (in. / mm): 107.2 / 2722
Overall Length (in. / mm): 184.6 / 4699
Overall Width (in. / mm): 79.7 / 2025
Overall Height (in. / mm): 48.6 / 1235
Track (in. / mm): Front: 66.3 / 1685
Rear: 66.1 / 1678


Interior Dimensions

Headroom (in. / mm): 37.9 / 962
Legroom (in. / mm): 42.8 / 1087
Shoulder Room (in. / mm): 54.4 / 1382
Hip Room (in. / mm): 52 / 1321


Weights and Capacities

Dry Weight (lb. / kg): 3774 / 1712 (coupe)
3856 / 1749 (convertible)
Cargo Volume (cu. ft. / L)*: 12.5 / 355
Cargo and load capacity limited by weight and distribution.
Fuel Tank Capacity: 18.5 gal. / 70 liters

Corvette Spotter for the iPhone-txt
Introducing the Vette Spotter app for the iPhone.


The Vette Spotter app can identify the year of any Corvette.


All years and generations are covered, from 1953 to 2014. Over 350 photographs and detailed text are included.

Available_on_the_App_Store_Badge_US-UK_135x40_0801

To WebCars! Home